AI-SEE attends CAD Workshop and Tutorial at IEEE IV 2024, 2-5 June 2024, Jeju Island, Korea

On 2 June 2024 AI-SEE will take part in the 12th Workshop on Cooperative and Automotive Driving to be held as part of the IEEE Intelligent Vehicles Symposium on Jeju Island in Korea.The event including a tutorial on CAD standards will be held from 13.00 - 18.30 (local time). Alongside presenting key project outcomes, several project & industry partners will contribute to a prestigious Industry Panel.



About the workshop:

Recent developments in telecommunications, sensor, information processing and control technologies have enabled substantial progress in the domain of ITS. Cooperative Intelligent Transport Systems (C-ITS) as a precursor and enabler for high-level automated driving is currently one of the core topics in the ITS Community. C-ITS is in an early stage of deployment, as it is technologically achievable, but the deployment requires cooperation of multiple stakeholders. Automated driving is on the horizon, and will still need substantial and longer-term development and testing to make even the high automation levels a reality in complex situations, such as in urban environments, and in a transit period of only partial market penetration. Cooperative and automated transport are certainly complementary. They are expected to bring substantial benefits in terms of safety, comfort and (traffic and fuel) efficiency. Many challenges exist in this important domain.

The 12th Workshop on "Cooperative and Automated Driving" aims to further discuss cooperative and autonomous technologies for cooperative and automated driving. Similar to the past, the workshop intends to bring together high-level participants from industry in this domain, and also features an Industry Panel with experts from e.g. OEMs, Suppliers, Telecom and ICT, which will again foster the interactive exchange of academia and industry. The technical areas to be discussed include, but are not limited to the following:

  • Connected and Automated Vehicles            
  • Standardization
  • Modelling and validation
  • C-ITS/CCAM deployment
  • Security and privacy
  • Impact assessment
  • V2X communication technologies
  • Data analytics
  • 5G/6G research and testing
  • Spectrum


Agenda Workshop & Tutorial on Cooperative Automated Driving and Standards

13:00 – 13:10         

  • Opening and Introduction


13:10 – 13.30

  • Ensuring Safety at Intelligent Intersections: Temporal Logic Meets Reachability Analysis

Kaj Munhoz Arfvidsson, Frank J. Jiang*, Prof. Karl H. Johansson, Prof. Jonas Mårtensson (KTH Royal Institute of Technology, Sweden)

13.30 – 13:50

  • Cooperative 3D Multi-Object Tracking with Complementary Data Association for Connected and Automated Vehicles

Hao Su, Prof. Shin'ichi Arakawa*, Prof. Masayuki Murata (Osaka University, Japan)

13:50 – 14.05

  • European Research Project AI-SEE:Artificial Intelligence Enhancing Vehicle Vision in Low Visibility Conditions – Overview and Latest Results


Dr. Werner Ritter (Mercedes-Benz AG, Germany)

14:05 – 14:20

  • Physics-based Rendering of Inclement Weather

Prof. Alwin Kienle (Institute for Laser Technologies in Medicine and Metrology, University of Ulm, Germany)

14:20 – 14:35

  • Automated Driving in Harsh Winter Weather

Dr. Matti Kutila (VTT Technical Research Centre of Finland Ltd., Finland)

14:35 – 14:45

  • Break


14:45 – 15:00

  • On the Way to the Tipping Point: Complexities for Deployment of Connected and Intelligent Vehicle Systems


Rob Gee (Continental, USA)

15:00 – 15:15

  • CONNECT: Continuos and Dynamic Trust Assessment for Cooperative Mobility

Anderson Ferraz (DENSO, Germany)

15:15 – 15:30

  • Enhancing Localization, Perception and Maneuvering through Connectivity

Dr. Sergei Avedisov (Toyota North America R&D, USA)

15:30 – 15:45

  • Enhancement of Autonomous Driving Platform using Data Sharing Between Infrastructure and Vehicle

Vandana Narri (Scania, Sweden)

15:45 –16:20

  • CAD Industry Panel

Panelists: Speakers and IEEE ITSS/SC members

16:20 – 16:30

  • Break


16:30 – 16:40

  • ITSS/SC and Tutorial Introduction

Dr. Meng Lu (IEEE ITSS/SC)

16:40 – 17:05

  • IEEE SA and IEEE Standards

Soo Kim (IEEE SA)

17:05 – 17:30

  • CAD Deployment and Standards

Dr. Ignacio Alvarez (Intel Labs, USA) & Dr. Javier Ibanez-Guzman (Renault S.A., France)

17:30 – 18:20

  • Discussions / Q&A


18:20 – 18:30

  • Wrap-up

Dr. Javier Ibanez-Guzman (IEEE ITSS/SC)


Organizer/Chair/Moderator Contact

Dr. Meng Lu
VP Standards Activities, IEEE Intelligent Transportation Systems Society
Member, Board of Governors, IEEE Standards Association (IEEE SA)
Steering Committee Member, IEEE Future Networks Technical Community
Mobile/WhatsApp/Signal: +31 6 4505 4735


The Tutorial from 16:30 - 18:30 will be hybrid and can be joined online.

Dial-in Information

Meeting number (access code): 2634 853 1835

Meeting password: pBVSE9XYe32

+1-646-992-2010,,26348531835## tel:%2B1-646-992-2010,,*01*26348531835%23%23*01* United States Toll (New York City)
+1-904-900-2303,,26348531835## tel:%2B1-904-900-2303,,*01*26348531835%23%23*01* United States Toll (Jacksonville)

+1-646-992-2010 United States Toll (New York City)
+1-904-900-2303 United States Toll (Jacksonville)

Global call-in numbers

Toll-free calling restrictions

You can also dial and enter your meeting number.

Can't join the meeting?

IMPORTANT NOTICE: Please note that this Webex service allows audio and other information sent during the session to be recorded, which may be discoverable in a legal matter. By joining this session, you automatically consent to such recordings. If you do not consent to being recorded, discuss your concerns with the host or do not join the session.



Picture credit: N.Riazi, Unsplash